Industrial Pulverizers and hammer Mills

Industrial Pulverizers and hammer Mills
See larger image

We offer superior quality dalia making machines. These dalia making machines are acknowledged amidst our clients for sturdy configuration and better performance. Our range of daliya machines are manufactured using high quality raw materials and precision-made parts. These daliya machines are widely accepted in the food industry, and are known for efficiency and cost effective rates.
Whether your application is small, large, straightforward or problematic, Techno can produce it with unequalled cost effectiveness.


Dalia Making Machine

Dalia Making Machine
See larger image
Download Pdf Dalia Making Machine
We have for our client commercial Dalia Machine that have fully machined & balanced beaters. These commercial Daliya Machine are popular for continuous crushing and suitable for making daliya. Offered in compact size commercial Daliya Machine do not require too much space.

Construction of Dalia Making Machinery

Commercial dalia machine is made from heavy duty cast iron base. Cast iron oil chamber housings for long life of bearings. Aluminum Grinding Chamber lined with serrated Stainless Steel plates, which protects the body from wear and tear. Grinding done by a set of Stainless fixed better on a balanced rotor. A screen classifier forms the lower half of the grinding chamber.

Application of Dalia Making Machinery

The Techno Wings Daliya Making pulverizer are used for a producing dalia of wheat ( broken wheat for wheat porridge, dalia), Maize daliya

Key Features of Dalia Making Machine

  • Unique and Reliable Design
    • The Dalia Making Machines series pulverizers are highly effective as well as non stop continuous pulverizing process.
  • All contacting parts are non corrosive materials.
  • All Rotating parts are dynamically balanced for less vibration & higher performances
  • Low temperature grinding technology thus the original ingredient cannot destroy.
  • Ideal for dry crushing
  • Increased production leading to faster return on the investments
  • Hardened & fully machined shelving type beaters thus less wear & tear.
  • Single pieces grinding chamber no separate joints of fabrication for out late.

Operating Principle of Dalia Making Machinery

The flow of material from the feeding hopper is regulating by means of side handle easily to suit the load. Rotor runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a 450 R.P.M. After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

Servicing Guidelines of Dalia Making Machinery

Open the cover of chamber all grinding parts cleaned with a brush in couple of minute and the pulverizer is ready for next grinding. If required, the grinding chamber can also washed with water. Remove the cotton balloon and the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the grinder will dry it. The beater when worm out removed and reserved by removing the cur clip lock holding to the rotor pins. When both the edges are worm out, they sharpened on an emery stone, to use as new. In addition, when completely warn out, replaced the equal weight and refitted. Please check the oil level of oil bath chamber regularly.

Standard Accessories of Dalia Making Machinery

  • Three Set of perforated round hole Screens
  • Easy movable hopper helps you to ensure continuous and steady feed to the machine. Very useful where feed material is to be manually dumped from bags.
  • Motor Pulley
  • Mid Steel Fabricated Foundation Plate with adjustable rail for motor.
  • Two Numbers of cotton balloon.

Extra Accessories of Dalia Making Machinery

  • Suitable totally enclosed fan cooled single or three phase Sq. cage motor as per IS: 325 or 996 is supplied with mono pulverizer {Electricity (Special power can be accommodated): 110/220/380/415 Volts, 50/60 Hz , 1/3 Phase }
  • Suitable miniature circuit breaker as per IS: 8828 with 3 meter cable & 3 pin top as per IS: 1293 are supplied with Daliya Machine as extra cost.
  • 3 meter 4 core cable, starter, ampere meter, capacitor, are supplied with daliya machine at extra cost.
  • All contacting parts Stainless steel 304 / 316 can be accommodated

Available Models of Dalia Making Machinery

Model TW-1402 TW-1410
Crushing Chamber size
DIA X WIDTH
Ø 12 Inch x 6 Inch
Ø 300 mm X 150 mm
Ø 16 Inch x 8 Inch
Ø 400 mm X 200 mm
Required Motor 2 H.P. ( 1.5 KW) OR 3 H.P. ( 2.2 Kw.) 5 H.P. ( 3.75 Kw) or 10 H.P. ( 7.5 Kw.)
Grinding Speed (Machine RPM) 450 RPM 450 RPM

Click for Estimated Price

Note:-

Due to continuous improvements, we reserve the rights to alter and/or amend dimensions/design without prior notice.
The Figure for capacities given are for guideline only may very force case to case and depending many factors.
This document was last modified on: by Techno Agencies (admin@pulverizerindia.com)

 

Contact Us

Techno Agencies
84, Shree Hari Industrial Estate,
Panna Estate Road, Rakhial, Ahmedabad
Gujarat
India
Postal code: 380023

E Mail:- admin@pulverizerindia.com
Phone:- +91-79-22743454
Fax:- +91-79-22745062
Mobile:- +91-9426088680

Recommended for you: